Panasonic PT-RCQ10 Operating Instructions Manual page 215

11) Turn on the power of the projector.
f The copied content is reflected to the projector.
Note
f The security password is the password set in the [SECURITY] menu → [SECURITY PASSWORD CHANGE].
Initial password of the factory default setting: awsqawsq
f The light source indicator <LIGHT1>/<LIGHT2> and the temperature indicator <TEMP> of the copy destination projector blink while copying
the data. Confirm the blinking of the indicators stops, and then turn on the power supply.
Chapter 5 Operations — Using the data cloning function
ENGLISH - 215