Example Applications; Backbone Example Application - ZyXEL Communications XGS1930-28 User Manual

The XGS1930-28HP and XGS1930-52HP come with a Power-over-Ethernet (PoE) feature. The XGS1930-
28HP and XGS1930-52HP support the IEEE 802.3at High Power over Ethernet (PoE) standard and IEEE
802.3af PoE standard.
Key feature differences between Switch models are as follows. Other features are common to all
models.
The following table describes the PoE features of the Switch by model.
Table 3 Models and PoE Features
SWITCH MODEL
XGS1930-28HP
XGS1930-52HP

1.2 Example Applications

This section shows a few examples of using the Switch in various network environments. Note that the
Switch in the figure is just an example Switch and not your actual Switch.

1.2.1 Backbone Example Application

The Switch is an ideal solution for small networks where rapid growth can be expected in the near future.
The Switch can be used standalone for a group of heavy traffic users. You can connect computers and
servers directly to the Switch's port or connect other switches to the Switch.
In this example, all computers can share high-speed applications on the server. To expand the network,
simply add more networking devices such as switches, routers, computers, print servers, and so on.
Chapter 1 Getting to Know Your Switch
POE FEATURES
IEEE 802.3af PoE
IEEE 802.3 at High Power over Ethernet (PoE)
Power management mode – Classification
Power management mode – Consumption
Scheduled PoE (PoE Time Range)
XGS1930 Series User's Guide
23