Figure 109 Advanced Application > Spanning Tree Protocol > MSTP
The following table describes the labels in this screen.
Table 64 Advanced Application > Spanning Tree Protocol > MSTP
LABEL
DESCRIPTION
Status
Click Status to display the MSTP Status screen.
Port
Click Port to display the MSTP Port screen.
Active
Select this check box to activate MSTP on the Switch. Clear this check box to disable MSTP on
the Switch.
Note: You must also activate Multiple Spanning Tree in the Advanced Application >
Hello Time
This is the time interval in seconds between BPDU (Bridge Protocol Data Units) configuration
message generations by the root switch. The allowed range is 1 to 10 seconds.
Spanning Tree Protocol > Configuration screen to enable MSTP on the Switch.
XGS1930 Series User's Guide
144