Ip Configuration - ZyXEL Communications XGS1930-28 User Manual

The following table describes the labels in this screen.
Table 26 Basic Setting > IP Setup > IP Status Details: Static
LABEL
Type
VID
IP Address
IP Subnet Mask
Figure 63 Basic Setting > IP Setup > IP Status Details: DHCP
The following table describes the labels in this screen.
Table 27 Basic Setting > IP Setup > IP Status Details: DHCP
LABEL
Type
VID
IP Address
IP Subnet Mask
Lease Time
Renew Time
Rebind Time
Lease Time Start
Lease Time End
Default
Gateway
DNS Server

8.6.4 IP Configuration

Use this screen to configure the default gateway device, the default domain name server and add IP
domains.
Chapter 8 Basic Setting
DESCRIPTION
This shows the IP address is manually assigned (Static).
This is the VLAN identification number to which an IP routing domain belongs.
This is the IP address of your Switch in dotted decimal notation for example 192.168.1.1.
This is the IP subnet mask of your Switch in dotted decimal notation for example 255.255.255.0.
DESCRIPTION
This shows the IP address is dynamically assigned from a DHCP server (DHCP).
This is the VLAN identification number to which an IP routing domain belongs.
This is the IP address of your Switch in dotted decimal notation for example 192.168.1.1.
This is the IP subnet mask of your Switch in dotted decimal notation for example 255.255.255.0.
This displays the length of time in seconds that this interface can use the current dynamic IP
address from the DHCP server.
This displays the length of time from the lease start that the Switch will request to renew its
current dynamic IP address from the DHCP server.
This displays the length of time from the lease start that the Switch will request to get any
dynamic IP address from the DHCP server.
This displays the date and time that the current dynamic IP address assignment from the DHCP
server began. You should configure date and time in Basic Setting > General Setup.
This displays the date and time that the current dynamic IP address assignment from the DHCP
server will end. You should configure date and time in Basic Setting > General Setup.
This displays the IP address of the default gateway assigned by the DHCP server. 0.0.0.0 means
no gateway is assigned.
This displays the IP address of the primary and secondary DNS servers assigned by the DHCP
server. 0.0.0.0 means no DNS server is assigned.
XGS1930 Series User's Guide
88