ZyXEL Communications XGS1930-28 User Manual page 265

Chapter 32 Link Layer Discovery Protocol (LLDP)
Table 132 Advanced Application > LLDP > LLDP-MED Location (continued)
LABEL DESCRIPTION
Longitude Enter the longitude information. The value should be from 0º to 180º. The negative value
represents the West.
• west
• east
Altitude Enter the altitude information. The value should be from –2097151 to 2097151 in meters or in
floors.
• meters
• floor
Datum Select the appropriate geodetic datum used by GPS.
• WGS84
• NAD83-NAVD88
• NAD83-MLLW
Civic Address Enter the Civic Address by providing information such as Country, State, County, City, Street,
Number, ZIP code and other additional information. Enter at least 2 fields in this configuration
including the Country. The valid length of the Country field is 2 characters and all other fields
are up to 32 characters.
• Country
• State
• County
• City
• Division
• Neighbor
• Street
• Leading-Street-Direction
• Street-Suffix
• Trailing-Street-Suffix
• House-Number
• House-Number-Suffix
• Landmark
• Additional-Location
• Name
• Zip-Code
• Building
• Unit
• Floor
• Room-Number
• Place-Type
• Postal-Community-Name
• Post-Office-Box
• Additional-Code
ELIN Number Enter a numerical digit string, corresponding to the ELIN identifier which is used during
emergency call setup to a traditional CAMA or ISDN trunk-based PSAP. The valid length is
from 10 to 25 characters.
Add Click Add after finish entering the location information.
Cancel Click Cancel to begin entering the location information afresh.
Index This lists the index number of the location configuration. Click an index number to view or edit
the location.
Port This lists the port number of the location configuration.
Location This field displays the location configuration information based on geographical coordinates
Coordinates that includes longitude, latitude, altitude and datum.
XGS1930 Series User's Guide
265