Table of Contents
Advertisement
About this documentation | APAS sensor head
1 About this
documentation
1.1
Validity of the documentation
This documentation applies to the following products:
• APAS sensor head CDE, V01.00.00 - V01.00.99,
Material number: 3842565041
The APAS sensor head is exclusively intended for assembly at the
following product:
• APAS assistant K1100-10i, V01.00.XX, material number: 3842562910
It is intended for system integrators (see chapter 2.4 Personnel
qualifications) to integrate the option into existing products or systems.
The documentation provides information on the proper installation and
use of the option and is version V01.00.01.
This documentation contains important information relating to the safe
and proper installation of the product.
f Fully read this documentation and particularly chapter 2
"Safety instructions" before working with the product.
1.2
Required and supplementary documentation
f Only commission the product if he documentation marked with the
book symbol
is available and you have understood and followed
the instructions in it.
Table 1: Required and supplementary documentation
Title
APAS assistant K1100-10i,
V01.00.00 - V01.00.99
1)
Electrical documentation sensor
head CDE
1)
Supplier documentation of the
company KUKA Roboter GmbH
1)
Download at: www.boschrexroth.com/mediadirectory
Included in the scope of delivery of the robot system
2)
1.3
Presentation of information
Standardized safety instructions, symbols, terms and abbreviations are
used so that you can use this documentation to work quickly and safely
with your product. These are explained in the following sections to help
you understand them better.
Document number Document type
3842563137
3842563625
2)
3 842 565 042, Edition 11.2020, Bosch Rexroth AG
5/52
Assembly
instructions
Advertisement
Table of Contents
