Assembling The Sensor Skin - Bosch rexroth APAS CDE V01.00.00 Operating Instructions Manual

42/52 APAS sensor head | Installation
Bosch Rexroth AG, Edition 11.2020, 3 842 565 042
6.5

Assembling the sensor skin

1. Connect the grounding cable between CDE and sensor skin.
2. Attach the sensor skin (1) to the collision element and carefully
close it.
3
2
3. Screw the halves of the sensor skin to the upper side of the sensor
skin using the screws (3) (approx. 2.8 Nm).
4. Screw in the screw (2) at the bottom of the sensor skin applying
approx. 2.8 Nm.
1