Table A.1 Service Conditions; Table A.2 Ambient Conditions - Reliance electric GV3000 Instruction Manual

A C Line Distribution System Capacity (maximum)
for 460 VAC Units
Control Method
Displacement Power Factor
Line Frequency
Line Voltage Variation
Line Dip Ride Through
Motor Lead Lengths
Analog Speed Reference Accuracy
Acceleration Adjustment Range
Carrier Frequency
Current Limit Adjustment
Service Factor
Speed Adjustable Range
Speed Regulation
Speed Reference Resolution
Torque Control Response
Torque Linearity
Operating Temperature (Ambient)
Storage Temperature (Ambient)
Humidity
Downloaded from StockCheck.com
Appendix A
Technical Specifications

Table A.1 Service Conditions

Table A.2 Ambient Conditions

Condition
1000KVA, three phase with 25,000 amps symmetrical
fault current capacity with a line impedance of less
than 8%
All digital vector, sinusoidal pulse width modulated
(PWM)
0.96
50/60Hz (+2 Hz)
-10% to +10%
Maximum 500 milliseconds vector
Adjustable up to 999.9 seconds (See P .042) V/Hz
76 meters (250 feet) total
0.5%
0.1 to 999.9 seconds (within the ability of current)
2 Hz, 4 Hz, or 8 Hz, software selectable
U.006 to 150% (based on drive nameplate rating)
vector
50% to 110% (based on drive nameplate rating) V/Hz
1.0
From 0 RPM to maximum speed
Vector 0.01% long term steady state
V/Hz motor slip dependent
1 RPM with local keypad, -4095 to +4095 counts with
a network or serial reference
180 to 220 Hz
+3% with optimal parameter setting (typical) (see
parameter U.005)
Specification
0 to +40 C (32 to 104 F)
-40 to +65 C (-40 to +149 F)
5 to 95% (non condensing)
A 1