Wiring The Terminal Strip; Figure 2.12 Typical Terminal Strip Connections - Reliance electric GV3000 Instruction Manual

2.7.2 Wiring the Terminal Strip

The terminal strip on the Regulator board provides terminals for connecting customer I/O devices.
See figures 2.8, 2.9, and 2.12. The following terminals are provided:
Terminals 1 3: RS 232 connections
Terminals 4 9: pulse tachometer connections
Terminals 10 11: analog output connections
Terminals 12 15: analog speed/torque reference connections
Terminals 16 25: 24V D C digital input connections (1 60 HP Regulator boards only)
Terminals 26 27: snubber resistor braking control connections (1 60 HP Regulator boards only)
Terminals 28 31: status relay connections
2 14
Downloaded from StockCheck.com
PULSE TACHOMETER
CONNECTIONS

Figure 2.12 Typical Terminal Strip Connections

FACTORY
INSTALLED
WIRES BETWEEN TERMINALS 16+16A AND
20 + 20A ARE NECESSARY FOR PROPER
OPERATION OF THE FUNCTION LOSS
INPUT. THEY SHOULD NOT BE REMOVED.