Reliance electric GV3000 Instruction Manual page 64

Terminal
Number
28 Normally Closed Contact
(Form B)
29 Normally Closed Contact
Common (Form B)
30 Normally Open Contact
(Form A)
31 Normally Open Contact
Common (Form A)
Downloaded from StockCheck.com
Table 7.1 Wiring Signal and Control I/O to the Terminal Strip (Continued)
Description
Wiring the Output Status Relays
Parameters/Wiring Connections
Both Form A and Form B contacts are rated for
250 VAC/30 VDC at 5 amps resistive or 2 amps inductive
load.
The following parameter must be set:
P .013: Output Relay Configuration
Note that depending on the setting of parameter P .013, the
relay coil will energize (the normally open contact will close
and the normally closed contact will open). Refer to the
GV3000 Programming instruction manual (D2 3339) for
more information.
28 29 30 31
7 15