Usage And Maintenance; Included - Fenix HP30R Quick Start Manual

On head: clip the battery case on the holder, and it can be assembled on the helmet with the
included helmet attachment hooks.
Belt‐worn: clip the battery case on the included stainless steel belt clip, the lamp can be
belt‐worn together with the extension cable.
Usage and Maintenance

Disassembling the sealed head can cause damage to the lamp and will void the warranty.

Fenix recommends using an excellent quality Fenix battery.

If the lamp will not be used for an extended period, remove the battery, or the lamp could
be damaged by electrolyte leakage.

Take out the battery to prevent accidental activation during storage or transportation.

Long‐term use can result in O‐ring wear. To maintain a proper water seal, replace the ring
with an approved spare.

Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts
may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following
reasons:
A: The battery needs replacing or recharging.
Solution: Replace or recharge the battery (Ensure the battery is inserted according to the
manufacturer's specifications).
B: The contact point or contact of the battery or headlamp is dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don't work, please contact the distributor.
Included