Advertisement
Quick Links
Technical Parameters
Spotlight Mode
ANSI/PLATO FL1
Turbo High Med Low Turbo High Med Low High Med Low Flash
1600
lumen
s
Output
1
hour
30
minut
Runtime
es
223
mete
rs
Distance
12448
cande
la
Intensity
Impact
Resistance
Submersible
Note: According to the ANSI/PLATO FL1 standard, the above specifications are from the results
produced by Fenix through its laboratory testing using the included Fenix ARB-L18-3400 battery under
the temperature of 21±3°C and humidity of 50% - 80%. The true performance of this product may vary
according to different working environments and the actual battery used.
Warning
◎Do place this headlamp out of the reach of children!
◎Do NOT shine the headlamp directly into the eyes of anyone!
(ENGLISH)Fenix HM75R Headlamp
800
350
50
1000
lumen
lumen
lumen
lumen
s
s
s
3
50
hours
hours
hour
11
30
50
hours
minut
minut
minut
es
es
158
101
39
mete
mete
mete
mete
rs
rs
rs
6262
2559
383
1071
cande
cande
cande
cande
la
la
la
Floodlight Mode
400
150
5
lumen
lumen
lumen
s
s
s
s
1
4
8
100
50
hours
hours
hours
es
60
43
25
5
mete
mete
mete
rs
rs
rs
rs
432
163
10
cande
cande
cande
la
la
la
la
2 meters
IP68
Red Light Mode
120
30
5
lumen
lumen
lumen
lumen
s
s
s
5
hours
32
110
220
20
hours
hours
hours
minut
es
16
9
4
mete
mete
mete
rs
rs
rs
70
20
4
cande
cande
cande
la
la
la
5
s
/
/
Advertisement
Related Manuals for Fenix HM75R
Summary of Contents for Fenix HM75R
- Page 1 Note: According to the ANSI/PLATO FL1 standard, the above specifications are from the results produced by Fenix through its laboratory testing using the included Fenix ARB-L18-3400 battery under the temperature of 21±3°C and humidity of 50% - 80%. The true performance of this product may vary according to different working environments and the actual battery used.
- Page 2 ◎Uses one Luminus SST40 cold white LED, two Luminus SST20 neutral white LEDs, and one OSRAM GR QSSPA1.23 red light LED; with a life span of 50,000 hours each. ◎Powered by an ARB-L18-3400 battery or an HM75R power extender*, the latter doubles the runtime on average.
- Page 3 Mode switching Turn the rotary switch to cycle through OFF ⇄Spotlight⇄Floodlight⇄Red light. Output selection Spotlight mode: With the lamp switched on, single click the electronic switch to cycle through Low→Med→High→Turbo. Floodlight mode: With the lamp switched on, single click the electronic switch to cycle through Low→Med→High→Turbo.
- Page 4 Only the use of quality batteries with circuit protection will reduce the potential for combustion or explosion. Cell damage or short circuiting is considered user induced damage and is not covered by any Fenix warranty or liability. Only using the Fenix ARB-L18 Series battery is recommended.
- Page 5 9 V charging voltage) at the Low output in the last selected mode before it recalls the selected output. *The above two descriptions still apply when the headlamp is charged by a HM75R power extender, even if the headlamp battery is inserted backward or not inserted at all.
- Page 6 B: The threads, PCB board contact or other contacts are dirty. Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol. If the above methods don't work, please contact the distributor. Included Fenix HM75R headlamp, ARB-L18-3400 battery, USB Type-C charging cable, Spare O-ring, User manual, Warranty card...
Need help?
Do you have a question about the HM75R and is the answer not in the manual?
Questions and answers