Do you have a question about the HP35R and is the answer not in the manual?
Questions and answers
Michael Granger
January 26, 2025
After plugging the unit to a usb C cable known to be functioning and leaving it plugged in overnight still have only one charge indicator light flashing
1 comments:
Mr. Anderson
February 10, 2025
The charge indicator light on the Fenix HP35R may be flashing after being plugged in overnight due to a poor battery level or an issue with the battery case. The manual states that if the headlamp flickers, shines intermittently, or fails to illuminate, the battery case should be recharged. If recharging does not resolve the issue, it is recommended to contact the distributor.
Page 1
Note: According to the ANSI/PLATO FL1 standard, the above specifications are from the results produced by Fenix through its laboratory testing using two built-in 5000mAh batteries under the temperature of 21±3°C and humidity of 50% - 80%. The true performance of this product may vary according to different working environments.
◎Do NOT shine the headlamp directly into the eyes of anyone! ◎Do NOT place light head near flammable objects, high temperatures can cause objects to overheat and become flammable/ignite! ◎Do NOT use the headlamp in inappropriate ways such as holding the unit in your mouth, doing so could cause serious personal injury or death if the headlamp or internal battery fails! ◎This headlamp will accumulate a significant amount of heat while operating, resulting in a high temperature of the headlamp shell.
Page 3
turn on the lamp. Off: With the lamp switched on, turn the rotary switch counterclockwise to“ ” to turn off the lamp. Mode Switching Turn the rotary switch to cycle through OFF⇋Spotlight⇋Floodlight⇋Spot-and-floodlight. Output Selection Spotlight mode: With the lamp switched on, single click Switch A to cycle through Low→Med→High→Turbo.
caused by high temperature(s). When the lamp head is moved away from the illuminated object for more than 1.2 seconds, the headlamp will automatically recall the previously used output level. Charging 1. Uncover the anti-dust cap on the battery case and plug the USB Type-C side of the cable into the port on the battery case.
◎The headlamp may flicker, shine intermittently or even fail to illuminate due to poor battery level. Please recharge the battery case. If this method doesn't work, please contact the distributor. Included Fenix HP35R headlamp, 2-in-1 Type-C charging cable, 2 x Cable clips, Extension cable, User manual,...
Need help?
Do you have a question about the HP35R and is the answer not in the manual?
Questions and answers
After plugging the unit to a usb C cable known to be functioning and leaving it plugged in overnight still have only one charge indicator light flashing
The charge indicator light on the Fenix HP35R may be flashing after being plugged in overnight due to a poor battery level or an issue with the battery case. The manual states that if the headlamp flickers, shines intermittently, or fails to illuminate, the battery case should be recharged. If recharging does not resolve the issue, it is recommended to contact the distributor.
This answer is automatically generated