Usage And Maintenance - Fenix HM75R Manual

Usage and Maintenance

◎Disassembling the sealed head can cause damage to the lamp and will void the warranty.
◎Fenix recommends using excellent quality batteries.
◎If the lamp will not be used for an extended period, remove the batteries, or the lamp could be
damaged by electrolyte leakage.
◎Turn off the lamp and take out the batteries to prevent accidental activation during storage or
transportation.
◎Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an
approved spare.
◎Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts may cause
the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:
A: Low battery.
Solution: Recharge or replace the batteries (Ensure batteries are inserted according to the manufacturer's
specifications).
B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don't work, please contact the distributor.
Included
Fenix HM75R headlamp, ARB-L18-3400 battery, ARB-L21-5000 V2.0 battery, 1 meter extension cable, 2
x Spare O-rings, User manual, Warranty card