Advertisement
Quick Links
(ENGLISH)Fenix HM65R-T V2.0 Headlamp
Warning
◎Do place this headlamp out of the reach of children!
◎Do NOT shine the headlamp directly into the eyes of anyone!
◎Do NOT place the headlamp near flammable objects, high temperatures can cause objects to
overheat and become flammable/ignite!
◎Do NOT use the headlamp in inappropriate ways such as holding the unit in your mouth, doing so
could cause serious personal injury or death if the headlamp or internal battery fails!
◎This headlamp will accumulate a significant amount of heat while operating, resulting in a high
temperature of the headlamp shell. Pay close attention to avoid burns.
◎Turn off and lock the lamp or take out the battery to prevent accidental activation during storage or
transportation.
◎The LEDs of this headlamp are not replaceable; so the whole headlamp will need to be replaced
when any of the LED reach the end of its lifespan.
Technical Parameters
ANSI/PLAT
O FL1
High
1600
lumens
OUTPUT
3 hours*
RUNTIME
170
meters
DISTANCE
7353
candela
INTENSITY
IMPACT
RESISTANC
E
WHITE LIGHT
Med
Low
400
130
lumens
lumens
12
24
hours
hours
83
49
meters
meters
1715
604
candela
candela
WARM WHITE LIGHT
High
Med
800
400
lumens
lumens
lumens
6
12
24 hours
hours*
hours
112
82
meters
meters
meters
3155
1690
candela
candela
candela
2 meters
Low
Eco
130
5
5 lumens
lumens
300
hours
hours
48
10
meters
meters
577
26
candela
candela
SOS
600
10
26
Advertisement
Related Manuals for Fenix HM65R-T V2.0
Summary of Contents for Fenix HM65R-T V2.0
- Page 1 (ENGLISH)Fenix HM65R-T V2.0 Headlamp Warning ◎Do place this headlamp out of the reach of children! ◎Do NOT shine the headlamp directly into the eyes of anyone! ◎Do NOT place the headlamp near flammable objects, high temperatures can cause objects to overheat and become flammable/ignite! ◎Do NOT use the headlamp in inappropriate ways such as holding the unit in your mouth, doing so...
- Page 2 Note: According to the ANSI/PLATO FL1 standard, the above specifications are from the results produced by Fenix through its laboratory testing using the included Fenix ARB-L18-3400 battery under the temperature of 21±3°C and humidity of 50% - 80%. The true performance of this product may vary according to different working environments and the actual battery used.
- Page 3 USB Type-C side of the charging cable into the charging port of the lamp. ◎With the headlamp switched off, the normal charging time of the Fenix ARB-L18-3400 battery is about 3 hours from depleted to fully charged with a 5 V/2 A charging adapter. Only Low output of...
- Page 4 Only use quality batteries with circuit protection will reduce the potential for combustion or explosion; but cell damage or short circuiting are potential risks the user assumes. Quality Li-ion battery with protective circuit will reduce risks. Fenix ARB-L18 Series battery is recommended.
- Page 5 Eco output is reached. When this happens in Eco output, one of the battery level indicators blinks to remind you to timely recharge or replace the battery till the battery runs out. *Note: This only works with a Fenix ARB-L18 Series battery. Headband Assembly Notice: The headband is factory assembled by default.
- Page 6 Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol. If the above methods don't work, please contact the distributor. Included Fenix HM65R-T V2.0 headlamp, ARB-L18-3400 battery, Spare O-ring, USB Type-C charging cable, User manual, Warranty card...
Need help?
Do you have a question about the HM65R-T V2.0 and is the answer not in the manual?
Questions and answers