Table of Contents
Advertisement
Dionex Reagent-Free Controller
B.8
Figure 83 shows the controller and the components used for installing an
eluent generator.
EGC Rack
Reagent-Free
Controller
Figure 84 illustrates the liquid flow path through the eluent generator
components after all plumbing connections are complete. The EGC,
CR-TC, and EGC holder are shipped in separate boxes. The EGC degas
assembly is installed inside the EGC holder at the factory. When
installation is complete, all components fit inside the EGC holder.
76
Dionex RFC-30 Eluent Generator Installation
Drip Tray
Bracket
Figure 83. Dionex RFC-30 Components
EGC Holder
with EGC
Degas
Assembly
Luer
CR-TC
Fittings
Vent Tubing
Clips
EGC
Vent
Tubing
Doc. 031880-04 1/12
Advertisement
Table of Contents
