Calibrating The Dionex Rfc - Thermo Scientific Dionex RFC Operator's Manual

Dionex Reagent-Free Controller
3. Set the
Figure 4) to the
4. Turn on the Dionex RFC power.
5. Insert the diskette in the computer's drive. Display the diskette
contents, using My Computer or Windows
double-click the RFC icon
serial ports.
6. Select the computer serial port and click
download dialog box appears.
7. Click
When complete, the Dionex RFC screen displays the new
Moduleware version number.
8. Set the
the
6.2

Calibrating the Dionex RFC

When to Calibrate
Calibration is done at the factory before shipping. Thereafter, the Dionex
RFC should be calibrated if a new electronics board is added or before a
validation procedure.
How to Calibrate
1. Press the
Figure 42).
2. Press
3. Press
The message "Calibration in Progress" is displayed. When calibration
is complete, the display returns to the default status screen.
48
Download/Operation
Download
to start the download.
OK
Download/Operation
(out) position.
Operation
 
or button to display the calibration screen (see
Figure 42. Calibration Screen

to select .
YES
.
ENTER
button on the Dionex RFC rear panel (see
(in) position.
®
Explorer and
. A dialog box appears with a list of
. A Moduleware
OK
button on the Dionex RFC rear panel to
Doc. 031880-04 1/12