I Received Call Sign; D Desired Call Record Indication - Icom ID-800H Firmware Update

Vhf/uhf digital transceiver
Hide thumbs Also See for ID-800H:
Table of Contents

Advertisement

1
DIGITAL MODE OPERATION

I Received call sign

When a call in digital voice mode is received, the calling sta-
tion and using repeater call signs being used can be stored
into the received call record. The stored call signs are view-
able in the following manner.
D D Desired call record indication
q Push [SET•LOCK] to enter call sign set mode.
• Rotate [DIAL] to select "CALLS" if necessary.
w Push [SET•LOCK] or [S.MW•MW] several times to select
the received call indication.
• "RXCALL," "RXRPT1," and "RXRPT2" are available for the re-
ceived station, repeater 1 and repeater 2 call signs, respectively.
e To confirm the received call, push [BAND•MODE] to enter
the received call sign indication mode.
• Push [SET•LOCK] or [S.MW•MW] to display last 6-digit or first
6-digit of the call sign, respectively.
• When "RXCALL" is selected in step w, the additional note can
be displayed by pushing [BAND•MODE].
• Push [BAND•MODE] once or twice to exit the indication mode.
14
r Push one of [TONE•T-SCAN•BK], [LOW•DUP] or
[MONI•DTMF•EMR] to exit call sign set mode.
z Push [
B(D-OFF)] to enter call sign set mode.
SET
SET
• Push [Y Y ] or [Z Z ] to select "CALLS," if necessary.
B
x Push [
B(D-OFF)] or [
SET
times to select the received call indication.
• "RXCALL," "RXRPT1" and "RXRPT2" are available for
the received station call sign, repeater 1 and repeater
2 call sign, respectively.
c To confirm the received call, push [BAND] to
enter the received call sign indication mode.
• When "RXCALL" is selected in step x, the additional
note can be displayed by pushing [BAND].
v Push [
A(MW)] to exit call sign set mode.
CLR
NOTE: The record is cleared once turning power OFF, or
overwritten when another call is received.
For your information
By selecting "MyCALL," "UrCALL," "RPT1 C" or "RPT2 C" at
step w as at above left, the programmed call sign can also
be displayed for confirmation.
[DIAL] rotation is necessary to select the desired call sign
channel in this case.
C(T-OFF)] several
ENT

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ID-800H and is the answer not in the manual?

Questions and answers

Table of Contents