How To Use The Rx History; Step1 View The Received Call Sign - Icom ID-51A Basic Instructions

New2001
If the selected repeater name
t
in step r is displayed in "TO"
on the DR mode screen, the
destination repeater setting is
completed.
Check whether you can access the re-
STEP 4
peater
Hold down [PTT] for approxi-
q
mately 1 second to access
the repeater.
New2001
2

HOW TO USE THE RX HISTORY

When a DV call is received, the call signs of the caller, the
called station and the called station's access repeater are
stored in the RX history file.
Up to 50 calls can be stored.
This section describes how to view the RX history screen and
how to save the displayed call signs to memory.
21
Completed
Transmitting
Go to step w
When receiving a
The S-meter appears
and the caller's call
sign is displayed.
Oh!
ACCESS THE REPEATER
If you get a reply call, or "UR?"
w
appears on the LCD within 3
seconds, your signal reached
your access repeater and your
call was successfully sent from
your destination repeater.
Successfully sent!
to various repeaters by
changing the "TO" setting!
NOTE: See page 35 for status indications after a reply is
received.
View the received call sign
STEP 1
Hold down for 1 second.
q
RX HISTORY
record number
RX message
Repeater call sign
of the called station
RX HISTORY screen (RX01)
Push D-pad( !) to view other
w
RX history.
D-pad
(Ent)
( )
RX HISTORY screen (RX02)
NOTE: If you push D-pad(Ent) while in the RX HISTORY
screen, the detailed contents of the RX history are dis-
played.
1
1
20
New2001 New2001
Caller station
(upper)*
* A note may
be displayed
after "/".
Called station
(lower)
Received date
and time