Download Print this page
BDI KITE 5301 Quick Start Manual

BDI KITE 5301 Quick Start Manual

1 shelf extension

Advertisement

Quick Links

KITE
1 Shelf Extension
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your BDI
products. Register today, and you will be entered to win free a BINK table
from BDI: www.bdiusa.com/register
Placement and Maintenance
Your Kite Shelf is designed for indoor use on level floors.
Clean wood veneer and steel parts with a moist cloth.
Kite is engineered for easy assembly. Carefully follow this procedure to
prevent any damage. Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, contact BDI Customer Service at: customerservice@bdiusa.com.
For all other concerns, please contact your BDI retailer.
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Kite & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2017, BDI
Made in China. 10.16.2018 V2
5301
bdiusa.com
customerservice@bdiusa.com
T1 Hex Driver x 1
H1 1/4-20 x 15 mm
Flat head Screw x 5
A2 Shelf rail x 1
A1 Shelf x 1
C1 Horizontal frame
x 1
C2 Uprights x 5

Advertisement

loading
Need help?

Need help?

Do you have a question about the KITE 5301 and is the answer not in the manual?

Questions and answers

Summary of Contents for BDI KITE 5301

  • Page 1 C2 Uprights x 5 Designed by Matthew Weatherly. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. Kite & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2017, BDI Made in China. 10.16.2018 V2...
  • Page 2 Step 2 - Place shelf A1 on a worktable or non-marring floor. Position shelf rail A2 as shown with holes facing the back. Important! Make sure the ends of the shelf and rail are aligned. If the rail is not completely aligned with the end of the shelf, lift the entire rail straight up and reposition.
  • Page 3 Step 3 - Place the hex driver T1 into each of the 5 holes and turn clockwise to tighten. bdiusa.com KITE 5301 customerservice@bdiusa.com 1 Shelf Extension kit...
  • Page 4 Step 4 - Unscrew the 5 flathead screws that attach the top shelf to the frame using hex driver T1 and set the top shelf aside. T1 Hex Driver bdiusa.com KITE 5301 customerservice@bdiusa.com 1 Shelf Extension kit...
  • Page 5 Step 5- Remove the 5 top caps by un-screwing them by hand. caps bdiusa.com KITE 5301 customerservice@bdiusa.com 1 Shelf Extension kit...
  • Page 6 Step 6 - Thread the 5 uprights C2 into the top of the frame. Use both hands to fully tighten. Make sure the wall anchor straps are still attached to the frame. wall attachment strap bdiusa.com KITE 5301 customerservice@bdiusa.com 1 Shelf Extension kit...
  • Page 7 Step 8 - Using a step ladder, place horizontal frame C1 on top of the frame as shown with triangular tabs facing up. Attach by screwing caps into the tops of the hubs as shown. Use both hands to fully tighten. caps Hubs All tabs bdiusa.com KITE 5301 customerservice@bdiusa.com 1 Shelf Extension kit...
  • Page 8 Step 9 - Attach the 5th and 6th level shelves using flathead screws H1 screwing them into the threaded inserts on the bottom of the shelves from below using hex driver T1. H1 Flat head Screw x 10 T1 Hex Driver bdiusa.com KITE 5301 customerservice@bdiusa.com 1 Shelf Extension kit...
  • Page 9 Use a step ladder to reach items on the top shelf if needed. • Place heavier objects on the bottom shelves. • The wall anchor straps should be attached behind the 5th level shelf (or above). • Enjoy! bdiusa.com KITE 5301 customerservice@bdiusa.com 1 Shelf Extension kit...