BDI SEQUEL Owner's Manual

SEQUEL
LIFT DESK
OWNER'S MANUAL
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your BDI
products. Register today, and you will be entered to win free a BINK table
from BDI: www.bdiusa.com/register
Placement and Maintenance
Sequel® Lift Desk is designed for indoor use on level floors. Clean glass
with glass cleaner, and steel parts and wood veneer with a moist cloth.
Your Sequel® Office furniture is engineered for easy assembly. Carefully
follow this procedure to prevent any damage. Do not use power tools
for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at customerservice@bdiusa.
com. For all other concerns, please contact your BDI retailer.
C6 Cord Conduit x 1
C1 Leg x 2
C2 Foot x 2
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Sequel & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2017 BDI
Made in Taiwan. 02.24.2017 v6
6051/6052
®
bdiusa.com
customerservice@bdiusa.com
T1 5mm Hex Wrench
T2 4mm Hex Wrench
H1 #10 Wood Screw x 4
H2 #6 Wood Screw x 6
H3 M6 x 12mm Screw x 12
H4 M6 x 16mm Screw x 8
H5 1/4-20 x 12mm Screw x 7
H6 Cord Clip x 6
H7 Leveler x 4
H8 Glass Bumper x 2
H9 Dual Lock Dot x 8
C9 Grommet Cover x 1
C8 Glass Panel x 1
A1 Main Panel x 1
C3 Control Module x 1
C7 Wire Tray x 1
C4 Keypad x 1
C5 Power Cord x 1
Tool Required:
Phillips Screwdriver