Page 1
KAVA 9600 ™ BENCH USER MANUAL LET’S GET STARTED. DESIGN MATTHEW WEATHERLY...
Page 2
Congratulations on the purchase of your KAVA bench from BDI. Your bench has been designed to provide a lifetime of enjoyment. This manual will provide assembly instructions and other helpful information to ensure you get the most out of your product.
Page 3
HARDWARE AND COMPONENTS Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface, such as carpet. For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com. For all other concerns, please contact your BDI retailer.
(H1) with the Hex Wrench (T1) to fasten the Shelf Plank (C3) to the Leg (C1). Repeat this SCREW – H1 until both shelf planks are attached to both legs. Then roll the bench onto its bottom side. 4 | BDIUSA.COM KAVA 9600...
Page 5
STEP 2. PREPARE SEAT PLANKS ASSEMBLY Place the Seat Plank (C2) face down on a non- marring surface. Insert the Barrel Nut (H3) into HEX WRENCH– T1 the hole as shown below. Take care to align the Barrel Nut with the hole on the Seat Plank Stretcher.
Page 6
HEX WRENCH – T1 Screw (H2), thread the screw through the Leg (C1) until it engages the Barrel Nut (H3) in the Seat Plank. SCREW – H2 Tighten the screw. Ensure that all screws are tight. 6 | BDIUSA.COM KAVA 9600...
While BDI’s stained wood finishes are stable in tone & appearance, all finishes are subject to some degree of discoloration with prolonged exposure to direct sunlight. Please avoid positioning your BDI cabinet in any area with ample direct sunlight.
Select chairs carry coverage for five (5) years from the date of the product delivery, based on an 8-hour daily use pattern. BDI reserves the right to refine or update its warranty from time to time. See the complete and latest warranty document at www.bdiusa.com/warranty.
Need help?
Do you have a question about the KAVA 9600 and is the answer not in the manual?
Questions and answers