BDI sequel Assembly Instructions Manual

Component List
H - 4mm Hex Wrench x 1
H2 - 3mm Hex Wrench x 1
I -Toggle Anchor Kit x 2
J - Washer x 6
K - Wood Screw x 4
L - Drywall Anchor x 2
M - Drywall Screw x 2
N - Set Screw x 4
O - Adhesive Dot x 4
P - 1/4-20 x 38 mm Screw
Q - 1/4-20 x 12 mm Screw
R - 1/4-20 x 6mm Screw
S - Kick Panel Stop x 2
T - Power Strip Bay x 1
U - Adhesive Bumper x 2
V - Drawer Liner x 1
W -1/4-20 x 58mm Screw
X - Adhesive Foam/Magnet
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws. "Sequel" and BDI are trademarks of
Becker Designed, Inc. All Rights reserved. ©2014 Becker Designed, Inc.
Made in Taiwan. 6004REV052416v4
sequel
®
6004
wall-mounted desk
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today, and you will be entered to win free a
BINK table from BDI: www.bdiusa.com/register
Placement and Maintenance
Sequel
glass cleaner, and steel parts and wood veneer with a moist cloth.
Your Sequel
Carefully follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at customerservice@
bdiusa.com. For all other concerns, please contact your BDI Retailer.
x 4
x 4
x 4
A - Wall Attachment Rail x 1
x 3
x 2
CL - Left Desk Side x 1
a s s e m b l y i n s t r u c t i o n s
bdiusa.com
Office Furniture is designed for indoor use. Clean glass with
®
® Home Office Furniture is engineered for easy assembly.
TWO PERSON ASSEMBLY
G - Wire Management Lid x 1
1
customerservice@bdiusa.com
F - Top Glass x 1
CR - Right Desk Side x 1
B - Drawer Assembly x 1
E - Kick Panel x 1
D - Wire Management Trough x 1