Product End Of Life & Recycling - Dometic Go Power GP-ISW-200 User Manual

Pure sine wave inverter
Table of Contents

Advertisement

6. END OF LIFE - RECYCLING
Product E.O.L (End of life) Information
DO NOT DISPOSE OF THIS PRODUCT WITH NORMAL GARBAGE
The easiest way to recycle the GP-ISW is to take the unit to a local certified e-waste (electronics
waste) recycling centre. Knowing for sure if your appliances are being recycled properly is tricky.
If you're in doubt just ask. Recyclers that are certified should gladly show you their certification. If
the re-cycler is certified, chances are very high that they are recycling responsibly.
To find your local e-waste centre please contact your local municipality. The following website also
has information on local recycling centres: www.earth911.com/recycling-center-search-guides
If you have no local certified e-waste recycling centre, the GP-ISW can be disassembled manually
and recycled responsibly. A Phillips screwdriver is required to disassemble the GP-ISW. Note: The
GP-ISW should only be disassembled at the end of its service life. Go Power! provides no spare
parts for the GP-ISW.
This product required the extraction and use of natural resources. It may con-
tain substances that could be harmful to the environment or human health if
improperly handled at the product's end of life. In order to avoid release of such
substances into the environment and to reduce the use of natural resources,
we encourage you to recycle the GP-ISW in an appropriate way that will ensure
most of the materials are reused or recycled appropriately.
www.earth911.com/recycling-center-search-guides
Local recycling centres can be found here;
gpelectric.com | [page 31]

Advertisement

Table of Contents
loading

This manual is also suitable for:

Go power gp-isw-400

Table of Contents