Dometic Go Power GP-ISW-200 User Manual page 24

GP-ISW-200 LED signal
Status
Power on
Normal
Saving mode
Under voltage
alarm
Over voltage
Over
temperature
O/P short
circuit
O/P over load
Shut down
under voltage
Shut down over
voltage
Fan alarm
 SE400 LED signal
[page 24] | gpelectric.com
Status
LED Signal
R=red, O=orange, R=red
Green
Orange
Red
Table 7. GP200 & GP350 LED status
LED Signal
4. OPERATION
4. OPERATION
Description
Beep twice, LED shows red 
orange  green  green
LED lights in solid green
LED flashes green
LED flashes green condition in
intermittently once
intermediate condition once
every 2 seconds.
every 2 seconds
LED flashes orange light
slowly with 5 short beeps
every 15 seconds
LED flashes orange light every
0.1 seconds
LED flashes red light quickly
twice every 1.6 seconds
LED lights red; following two
short beeps. Inverter shuts
down after two seconds and
restart 3 times.
LED lights red; following two
short beeps. Inverter shuts
down after 3 minutes and
restart 3 times.
LED flashes red light every 0.4
seconds, then inverter shuts
down.
LED flashes red light every 0.1
seconds, then inverter shut
down.
LED flashes red light slowly
once and quickly twice every
1.6 seconds
Description