Parameter setting
Configure the basic settings and the refresh setting of a high speed data communication module in the parameter setting of an
engineering tool.
For details on the parameter setting, refer to the following:
MELSEC iQ-R High Speed Data Communication Module User's Manual (Application)
Startup method
Operating procedure
Select [MELSOFT] [GX Works3] from Windows Start.
Parameter setting
Operating procedure
1.
Create a new project.
[Project] [New]
2.
Select "Series", "Type", and "Program Language", and click the [OK] button.
3.
Set whether to use module labels and sample comments, click the [OK] button.
4.
Display the "Add New Module" screen.
[Navigation window] [Parameter] [Module Information] right-click [Add New Module]
4 PROCEDURES BEFORE OPERATION
48
4.1 Startup of High Speed Data Communication Module