Mitsubishi Electric MELSEC iQ-R Series User Manual page 39

Network setting for connection
Set the same value for the network portion of the IP addresses for a high speed data communication module and a
configuration personal computer.
Network portion Host portion
192.168. 3.
255.255.255.
Default value of the high speed data communication module
Set the network setting for the configuration personal computer in the "Internet Protocol Version 4 (TCP/IPv4) Properties"
screen. The operating procedure is as follows:
1.
Select [Control Panel]  [Network and Sharing Center]  [Change adapter settings].
2.
Select and right-click the network used to connect to a high speed data communication module, then select [Properties]
from the shortcut menu.
3.
Select "Internet Protocol Version 4 (TCP/IPv4)," and click the [Properties] button in the property screen of the selected
network connection.
4.
Set items for "Use the following IP address" in the "Internet Protocol Version 4 (TCP/IPv4) Properties" screen.
Set the same value.
Network portion
3
0
Configuration personal computer
Host portion
192.168. 3. 10
255.255.255. 0
4 PROCEDURES BEFORE OPERATION
4.1 Startup of High Speed Data Communication Module
Set different values.
37
4