Infrared Data Transfer Is Not Working
For troubleshooting problems between the Stylistic LT and the optional wireless
Note:
keyboard, refer to the section of Chapter 4 entitled "Encountering Problems when
Using the Wireless Keyboard."
If you are experiencing problems transferring data over the system's infrared
interface, check the following:
• Can the IrDA port on the pen tablet "see" the IrDA port on the other device? A
direct line-of-sight path must exist between the IrDA port on the pen tablet and
the IrDA port on the other device.
• The distance between the two devices must not be more than approximately 3 feet
or 1 meter.
• The center line of the IrDA port on the pen tablet must not be more than 15
degrees from the center line of the IrDA port on the other device.
• The device with which you are trying to communicate must be compliant with the
IrDA Standard Revision 1.0 or 1.1.
Pen Tablet Is Not Responding to the Pen
If your pen tablet is not responding to the pen, connect an external keyboard (either
wired or wireless) to the system to see if it responds to keyboard commands. If the
system doesn't respond to the keyboard, the application or system may have
crashed, and it may be necessary to reset the system. Note that the optional
mini-dock is required to connect a wired keyboard.
Cursor Is Not Tracking Pen
If the cursor on the screen is not accurately tracking the pen or appears to be
misaligned with the pen, calibrate the pen. See "Calibrating the Pen" earlier in this
chapter for details.
Solving Problems
3
3
3
3-7