Fujitsu Stylistic LT LT User Manual page 32

The Stylistic LT pen tablet does not have a bridge battery.
Prior to removing the battery pack, be sure to save your data
by tapping the Save-to-Disk icon on the keypad or connect an
AC adapter. Save-to-RAM will not suffice, since all data in
RAM is lost when the battery is removed.
1. Choose one of the following:
• Save your data by tapping on the Save-to-Disk icon on the keypad.
• Close all running programs, then shut down the system.
• Plug in an external DC power source.
2. Slide the battery latch to the unlocked position. (See Figure 2-4.)
3. Slide the battery pack out of the pen tablet.
If you are using an external battery charger, refer to the instructions provided with the
battery charger.
To install the battery pack, slide the battery pack into the pen tablet until it is firmly
seated. The spring-loaded battery latch automatically clicks into place.
To prevent pinching your fingers, keep them clear of the area
between the battery pack and the pen tablet when you install
the battery pack.
Once the battery pack is installed, you can start your system and use the system as you
normally would.
2-14 Using the Stylistic LT Pen Tablet
Caution
Warning