Using The Stylistic Lt Pen Tablet; System States - Fujitsu Stylistic LT LT User Manual

Chapter 2

Using the Stylistic LT Pen Tablet

This chapter covers the fundamental concepts, basic system operation and use, and
system functions of the Stylistic LT pen tablet. You should familiarize yourself with this
information before you attempt to operate the system.

System States

Before you begin using the Stylistic LT pen tablet, review the different system states (or
modes) that the pen tablet can use. Being familiar with these system states will help you
determine whether it is appropriate to turn on, resume, suspend, or shut down the
system when you begin a new session or end your current session. System behavior for
each system state is described briefly in the following, with each system state listed in
decreasing order of power usage:
• Fully On (normal) state
The system is running and the display screen is on. The system responds to the pen
or other input.
• Idle and Standby states
Some system functions are regulated or turned off to conserve power. The display
screen may be turned off. The system returns to the Fully On state when pen activity
or other input is detected.
• Suspend Modes: When you press the Suspend/Resume button, the system will
either go into Suspend-to-RAM mode, or Save-to-Disk mode. The mode the
system enters was determined when the system was configured -- usually by the
reseller who sold you the pen tablet or by your IS department. Contact one of
those individuals for more information on how your pen tablet is configured.
Suspend-to-RAM mode
When the Suspend option is set, data is saved to system RAM when the
Suspend/Resume button is pressed.
Save-to-Disk mode
When Save-to-Disk is set (or when the Save-to-Disk hotpad key is tapped),
data is written in the Save-to-Disk area on the hard disk.
2
2-1