Compact Desk Stand
PenCentra 130, Stylistic LT
The Compact Desk Stand FMWDS4
is a compact, adjustable device for
supporting your PenCentra 130 or
Stylistic LT pen tablet.
The desk stand consists of four
primary parts, as illustrated in
• Left Leg Assembly
• Right Leg Assembly
• Adjustment Cam
The desk stand is shipped flat and
fully assembled in a storage pouch.
To open the stand, unfold the leg
assemblies so that they resemble
Figure 1. The desk stand can now be
used on a flat, stable surface, such as
To use the desk stand, place it in the
desk stand so that the bottom rests
symmetrically in the J-shaped
sections of the leg assemblies.
The adjustment cam allows you to
change the viewing position of the
pen tablet display screen. To adjust
the viewing angle, turn the cam
around the shaft on which it is
mounted, as shown in Figure 2.
Depending on the position of the
cam, the vertical position of the
display screen varies. Experiment
with the adjustment cam until you
find an acceptable position.
When the stand is not in use, fold it
flat and store it in the storage pouch.
PenCentra 130 and Stylistic LT are trademarks of Fujitsu Personal Systems, Inc. © 1999 Fujitsu Personal Systems, Inc.
Left Leg Assembly
Figure 1. Compact Desk Stand
Figure 2. Adjustment Cam
Page 1 of 1