Pc Card Slots - Fujitsu Stylistic LT LT User Manual

PC Card Slots

The Stylistic LT pen tablet has two PC Card slots that allow you to install up to two
Type II PC Cards using both slots 1 and 2, or a single Type III PC Card using slot 1
only. Slot 2 is closest to the screen; slot 1 is closest to the back of the system. See
Figure 2-7 for PC Card slot location.
Notes: • Type II PC Cards will work in either slot, with one exception: zoomed video PC
Cards must be installed in slot 1.
• Some PC Cards require that the system be shut down before installation. Check
the user manual for your particular card before installing it.
To install a PC card, position it with the label facing up and slide it through the PC
card door shutters. When it is properly seated, the eject button will extend away from
the computer. Flip the eject button into the eject button tray such that it is parallel
with the system.
To remove a PC Card from a PC Card slot, flip up the adjacent eject button so that it
is perpendicular to the system, then push it in. When the PC Card pops out, carefully
remove it from the slot.
If you need assistance installing a PC Card in the Stylistic LT pen tablet, contact your
local help desk or your reseller.
PC Card 2 (upper slot)
PC Card 1 (lower slot)
2-18 Using the Stylistic LT Pen Tablet
Figure 2-7 PC Card Slots
2
Eject Buttons
PC Card