Cleaning Connectivity Peripherals - Fujitsu Point 1600 User Manual

Cleaning Connectivity Peripherals

The outside of the case, or shell, of connectivity peripherals may be cleaned. To clean
a cradle base and/or cradle module,
1. Slightly dampen a cloth or sponge with cleaner or disinfectant.
2. Wipe the outside of the connectivity peripheral case.
3. Do not apply cleaner to the inside of a cradle module.
It is recommended that you not clean the inside of a cradle module because it can
damage the connectors. In the event it is necessary to clean the inside of cradle
module,
1. Remove the pen tablet from the cradle module.
2. With a dry cotton cloth, gently rub the inside of the cradle module. Avoid
rubbing against connector pins.
3. If a more thorough cleaning is necessary, use cotton swabs to clean the inside of
a cradle module.
3-2 Care and Maintenance of Connectivity Peripherals
3