6.
Choose one of the following only if you have a locking version of the port
replicator. If you have a non-locking port replicator, skip this step.
• If you intend to lock the pen tablet into the port replicator, ensure that the
tubular lock is in the unlocked position. See "Locking and Unlocking the Port
Replicator" later in this chapter.
• If you do not intend to lock the pen tablet into the port replicator, you can set
the tubular lock in the locked position if desired. This ensures that the cradle
latches stay in the unlocked position when you insert the pen tablet into the
port replicator.
7.
Align the pen tablet with the port replicator, as shown in Figure 2-3.
Tubular Lock
2-8
Using Point 510/Point 1600 Connectivity Peripherals
Figure 2-3. Inserting the Pen Tablet