Fujitsu Point 1600 User Manual page 40

Tubular Lock
Figure 2-8. Inserting the Pen Tablet into the High Usage Cradle
5. Choose one of the following:
• If you have a non-locking high-usage cradle, or you do not intend to lock the
pen tablet, slide the pen tablet into the cradle. Note that the weight of the pen
tablet alone is sufficient to seat the connectors. It is not necessary to force or
push the pen tablet into the cradle (or engage the cradle latches) to make the
connection.
• If you have a locking high-usage cradle, and intend to lock the pen tablet,
you must push the pen tablet downward into the cradle until the cradle
latches click into place. Do not rock the components as you push them
together. (See "Synchronizing Cradle Latches" at the end of this chapter for a
description of how the cradle latches in the high-usage cradle work.)
6. If you are locking the pen tablet into the cradle, do so at this time. See "Locking
and Unlocking the High-Usage Cradle," later in this chapter for details.
2-20 Using Point 510/Point 1600 Connectivity Peripherals