Inserting The Pen Tablet - Fujitsu Point 1600 User Manual

Inserting the Pen Tablet

To insert the pen tablet into the high-usage cradle,
1. Suspend or shut down and turn off the pen tablet.
Note that driver software for the peripheral device you intend to use with the
pen tablet system may need to be initialized upon starting the system. If this is
the case, you may need to shut down the system rather than suspend system
operation. Contact your local help desk or reseller for details on using specific
peripheral devices with your system.
2. If using a locking-style high-usage cradle, ensure that the latches inside the
cradle are in the unlocked position. (See "Synchronizing Cradle Latches" at the
end of this chapter for a description of how the cradle latches in the high-usage
cradle work.)
3. Choose one of the following only if you have a locking version of the high-usage
cradle. If you have a non-locking version, skip this step.
• If you intend to lock the pen tablet into the high-usage cradle, ensure that the
tubular lock is in the unlocked position. See "Locking and Unlocking the
High-Usage Cradle" later in this chapter.
• If you do not intend to lock the pen tablet into the high-usage cradle, you can
set the tubular lock in the locked position if desired. This ensures that the
cradle latches stay in the unlocked position when you insert the pen tablet
into the cradle.
4. Align the pen tablet with the high-usage cradle, as shown in Figure 2-8.
High-Usage Cradle
2
2-19