Removing The Pen Tablet - Fujitsu Point 1600 User Manual

Removing the Pen Tablet

To remove the pen tablet from the wall-mount cradle,
1. Suspend or shut down and turn off the pen tablet.
2. Choose one of the following:
• If the cradle latches are in the unlocked position, you can pull the pen tablet
directly out of the cradle in a straight line.
• If the cradle latches are in the locked position (the pen tablet cannot be
pulled directly out of the cradle), push the pen tablet into the cradle to
release the cradle latches. Note that if the tubular lock is in the locked
position, you also need to unlock the tubular lock before you can release the
cradle latches. Ensure that both cradle latches click into the unlocked
position. If the pen tablet remains locked inside the cradle or only one latch
releases, see "Synchronizing Cradle Latches" at the end of this chapter for a
description of the latch mechanism and techniques for removing the pen
tablet.
3. Once removed from the cradle, you can start the pen tablet or, if you suspended
the pen tablet, resume system operation.
Wall-Mount Cradle
2
2-27