Detaching The Port Replicator From The Desk Stand; Folding The Desk Stand - Fujitsu Point 1600 User Manual

Detaching the Port Replicator from the Desk Stand

To detach the port replicator from the desk stand,
1. Pull the wire-frame catch on the back of the port replicator upward so it
disengages from the desk stand.
2. Lift the port replicator from the stand.
3. Fold the desk stand as described in "Folding the Desk Stand".

Folding the Desk Stand

To fold the desk stand,
1. Unlock the locking pins by grasping the desk stand as indicated in Figure 2-4
and squeeze to release the locking pins.
2. Fold the desk stand to the folded position.
3. Lock the locking pins in the folded locking position.
4. Push the top of the desk stand over the rubber feet on the base of the desk stand.
The desk stand is now locked in the folded position. Use the storage pouch to make
transporting the desk stand easier.
Port Replicator
2
2
2-13