Removing The Pen Tablet - Fujitsu Point 1600 User Manual

Removing the Pen Tablet

To remove the pen tablet from the high-usage cradle,
1. Suspend or shut down and turn off the pen tablet.
2. Choose one of the following:
• If the cradle latches are in the unlocked position, or you have a non-locking
version of the cradle, you can pull the pen tablet directly out of the cradle in
a straight line.
• If the cradle latches are in the locked position, push the pen tablet into the
cradle to release the cradle latches. Note that if the tubular lock is in the
locked position, you also need to unlock the tubular lock before you can
release the cradle latches. Ensure that both cradle latches click into the
unlocked position. If the pen tablet remains locked inside the cradle or only
one latch releases, see "Synchronizing Cradle Latches" at the end of this
chapter for a description of the latch mechanism and techniques for

removing the pen tablet.

3. Once removed from the cradle, you can start the pen tablet or, if you suspended
the pen tablet, resume system operation.
2-22 Using Point 510/Point 1600 Connectivity Peripherals
Figure 2-9. Adjusting the Viewing Angle
Adjustable Viewing Angle
Knob
2