Charge-Only Cradle; Inserting The Pen Tablet; Removing The Pen Tablet - Fujitsu Point 1600 User Manual

Charge-Only Cradle

The charge-only cradle is a desk-top Point 510 and Point 1600 connectivity peripheral
that connects the pen tablet to an AC adapter (only) for the purpose of recharging the
battery.
This section describes how to use the charge-only cradle. For information about
placing the AC adapter in the charge-only cradle, refer to the Connectivity Peripherals
Installation Guide: Point 510, Point 1600.

Inserting the Pen Tablet

The pen tablet does not have to be suspended or powered-down when it is inserted
into or removed from the charge-only cradle.
To insert the pen tablet into the charge-only cradle,
1. Align the pen tablet with the cradle.
2. Slide the pen tablet into the cradle.
Note that the pen tablet just rests on the charge-only cradle. It does not click into
place.

Removing the Pen Tablet

To remove the pen tablet from the charge-only cradle, lift the pen tablet up and out
of the cradle.
2-28 Using Point 510/Point 1600 Connectivity Peripherals
2
2
2