Wall-Mount Cradle; Opening The Wall-Mount Cradle - Fujitsu Point 1600 User Manual

Wall-Mount Cradle

The wall-mount cradle uses only high-usage contact pins to connect to the pen tablet.
Peripheral connectors on the wall-mount cradle are described in Table 2-4.
Port
DC Input
Keyboard Port
Note that these connectors are not visible or accessible when the wall-mount cradle is
installed.

Opening the Wall-Mount Cradle

The wall-mount cradle has two positions: open and closed. When open, the keyboard
tray is ready for use. (The angle of the keyboard tray is not adjustable.) When not in
use, the keyboard tray can be closed to save space in your work area. To open the
wall-mount cradle, pull the keyboard tray towards you and downward until the
keyboard tray stops in the open position.
Table 2-4. Wall-Mount Cradle Connectors
This connector is used to connect a DC power
source such as the Fujitsu AC adapter or auto
adapter.
This 6-pin mini-DIN plug can be used to attach a
Fujitsu low-power keyboard and most other
PS/2-style keyboards.
Description
Wall-Mount Cradle
2
2
2-23