Locking And Unlocking The Port Replicator - Fujitsu Point 1600 User Manual

8. Choose one of the following:
• If you have a non-locking port replicator, or you do not intend to lock the pen
tablet into the port replicator, slide the pen tablet into the port replicator.
Note that the weight of the pen tablet alone is sufficient to seat the
connectors. It is not necessary to force or push the pen tablet into the port
replicator (or engage the cradle latches) to make the connection.
• If you have a locking port replicator, and intend to lock the pen tablet into it,
you must push the pen tablet downward into the port replicator until the
cradle latches click into place. Do not rock the components as you push them
together. (See "Synchronizing Cradle Latches" at the end of this chapter for a
description of how the cradle latches in the port replicator work.)
9. If you are locking the pen tablet into the port replicator, do so at this time. See
"Locking and Unlocking the Port Replicator," later in this chapter for details.
10. Turn on the peripheral devices attached to the port replicator.
11. Start the pen tablet or, if you suspended the pen tablet, resume system
operation.
Note: If the required driver software for an attached peripheral device is not installed,
the device may not work or may work incorrectly. Refer to the documentation
provided with your peripheral device and install the driver software at this time or
contact your local help desk for further assistance if necessary.

Locking and Unlocking the Port Replicator

Note: Two versions of the port replicator are available: a locking version and a
non-locking version. This section is applicable only to the locking version.
The port replicator is equipped with a tubular lock that allows you to lock the pen
tablet into the port replicator. (You can also lock the cradle latches in the unlocked
position. This allows the pen tablet to be inserted into and removed from the port
replicator more easily as the cradle latches do not engage the pen tablet.)
To lock the pen tablet into the port replicator,
1. Ensure that the pen tablet is inserted in the port replicator and the cradle latches
are engaged in the locked position.
2. Insert the key into the tubular lock situated on the front of the port replicator
and turn the key clockwise until it stops.
Port Replicator
2
2-9