Fujitsu Point 1600 User Manual page 35

5. Align the pen tablet with the high-connectivity cradle, as shown in Figure 2-6.
Tubular Lock
6. Choose one of the following:
• If you have a non-locking high-connectivity cradle, or you do not intend to
lock the pen tablet into it, slide the pen tablet into the cradle. Note that the
weight of the pen tablet alone is sufficient to seat the connectors. It is not
necessary to force or push the pen tablet into the cradle (or engage the cradle
latches) to make the connection.
• If you have a locking high-connectivity cradle, and intend to lock the pen
tablet into it, you must push the pen tablet downward into the cradle until
the cradle latches click into place. Do not rock the components as you push
them together. (See "Synchronizing Cradle Latches" at the end of this
chapter for a description of how the cradle latches in the high-connectivity
cradle work.)
Figure 2-6. Inserting the Pen Tablet
High-Connectivity Cradle 2-15