Locking And Unlocking The High-Usage Cradle; Adjusting The Viewing Angle - Fujitsu Point 1600 User Manual

7. Start the pen tablet or, if you suspended the pen tablet, resume system
operation.

Locking and Unlocking the High-Usage Cradle

Note: Two versions of the high-usage cradle are available: a locking version and a
non-locking version. This section is applicable only to the locking version.
The high-usage cradle is equipped with a tubular lock that allows you to lock the pen
tablet into the cradle. You can also lock the cradle latches in the unlocked position.
This allows the pen tablet to be inserted into and removed from the cradle more
easily as the cradle latches do not engage the pen tablet.
To lock the pen tablet into the cradle,
1. Ensure the pen tablet is inserted in the cradle and the cradle latches are engaged
in the locked position.
2. Insert the key into the tubular lock situated on the front of the cradle and turn
the key clockwise until it stops.
To unlock the pen tablet, insert the key into the tubular lock situated on the front of
the cradle and turn the key counter-clockwise until it stops.

Adjusting the Viewing Angle

The high-usage cradle allows you to adjust the viewing angle of the pen tablet
display screen.
To adjust the viewing angle of the pen tablet in the cradle,
1. Hold the top of the pen tablet or cradle with one hand.
2. With the other hand, turn the knob on the side of the cradle counter-clockwise to
release the upper part of the high-connectivity cradle so it swivels freely.
3. Move the pen tablet or cradle to the desired viewing angle.
4. Tighten the knob to set the viewing angle.
High-Usage Cradle
2
2
2-21