Attaching the Port Replicator to the Desk Stand
To attach the port replicator to the desk stand,
1.
Open the desk stand as described in "Setting Up the Desk Stand".
2.
Place the port replicator on the desk stand, as shown in Figure 2-5.
3.
Lean the port replicator forward with one hand.
4.
With your free hand, pull the wire-frame catch on the back of the port replicator
upward.
5.
Push the back of the port replicator against the desk stand.
6.
Push the wire-frame catch onto the top rung of the desk stand.
2-12
Using Point 510/Point 1600 Connectivity Peripherals
Figure 2-5. Port Replicator on Desk Stand
2