Nortel Communication Server 1000 Fundamentals page 87

Figure 37
SET DATE (S D) screen
SET DATE DISTANT (S D D)
This command configures the date kept at the distant end of the system.
Its display is similar to
SET ESAM (S E)
This command configures the settings for ESAM protection. Its display is
similar to
Note:
replaces the RMI for any reason, all values set with the SET ESAM
command and all commands on the ESAM setup menu must be
reconfigured.
Figure 38
SET ESAM (S E) screen
1.
configures the number of digits in the ESAM directory number for
each channel and the trunk access digit, or the number dialed by the
user to obtain an outside line. Its display is similar to
ESAM:SYSTEM PARAMETERS screen" (page
Figure 37 "SET DATE (S D) screen" (page
Figure 38 "SET ESAM (S E) screen" (page
ESAM configuration values are stored on the RMI. If the user
System Parameters — This variation of the SET ESAM command
Nortel Communication Server 1000
Mini-Carrier Remote Fundamentals
NN43001-557 04.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
Host MMI interface 87
87).
87).
Figure 39 "SET
88).