Nortel Communication Server 1000 Fundamentals page 52

52 Installation and configuration
Table 8
Mini-Carrier Remote-unique hardware list (cont'd.)
Component
LMI
NT5D68
LMX
NT5D69
LMI Multi-I/O Cable
Assembly
NT5D85
LMI/LMX Multi-I/O
Cable Assembly
NT5D86
RMI Multi-I/O Cable
Assembly
NT5D87
Description
Local Mini-carrier Interface card (LMI) for installation in cabinet line card
slots.
Local Mini-carrier Extender card (LMX) for installation in cabinet line card
slots. Up to three LMXs may be installed, depending on configuration.
This 2 foot cable has a 50-pin Amphenol connector at one end that fits the
I/O connector for the first of the two line card slots occupied by the LMI.
The opposite end has five connectors (see
assembly (NT5D85)" (page
1. P2 First T1 carrier link
2. P3 Second T1 carrier link
3. P4 External alarm
4. P5 Man-Machine Interface (MMI)
5. P6 Serial Data Interface (SDI)
This 2 foot cable has a 50-pin Amphenol connector at one end that fits the
I/O connector for the second of the two line card slots occupied by the LMI.
The opposite end has three connectors, which are for:
•
P2 LMX1
•
P3 LMX 2
•
P4 LMX3
(See Figure 6 "LMI/LMX Multi-I/O cable assembly (NT5D86)" (page
This 2 foot cable has a 50-pin Amphenol connector at one end that fits the
I/O connector for the controller slot occupied by the RMI. The opposite end
has five connectors, which are for:
1. First T1 carrier link
2. Second T1 carrier link
3. External alarm
4. Man-Machine Interface (MMI)
5. (not used)
(See Figure 7 "RMI Multi-I/O Cable Assembly (NT5D87)" (page
Nortel Communication Server 1000
Mini-Carrier Remote Fundamentals
NN43001-557 04.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
Figure 5 "LMI Multi-I/O cable
21)). The five connectors are for:
22).)
23).)