Nortel Communication Server 1000 Fundamentals page 53

Table 8
Mini-Carrier Remote-unique hardware list (cont'd.)
Component
SDI Cable Kit
NT7R66AA
MMI Cable Kit
NT7R66BA
T1 CSU Cable Kit
(Two per span)
NT7R87BA
Description
This cable kit provides:
1 cable (10-foot, DB-9 male to DB-25 male)
1 adapter (DB-25F/DB-25F)
4 standoffs (0.125L, #6, round, nylon)
4 rivets (0.125 dia., 0.25 head)
At the local site, use this cable to connect the standard SDI card to the
male DB-9 connector (P5) of the NT5D85 LMI Multi-I/O Cable Assembly.
Note: The DB-25F/DB-25F is not used.
This cable kit provides:
1 cable (32-foot, DB-9 female to DB-25 male)
1 adapter (null-modem, DB25 male to DB25 female)
2 labels (2 in. X 1.473 in., white, self-laminating)
At the local site, use this cable to connect the MMI terminal to the DB-9
male P5 connector of the NT5D85 LMI Multi I/O cable assembly.
At the remote site, use this cable to connect the MMI terminal to the DB-9
male P5 connector of the LMI Multi-I/O cable assembly (NT5D85).
This cable kit provides:
1 cable (32-foot, RJ48 to RJ48)
1 cable (sub-assembly, T1/CSU RJ48 to RJ48)
1 adapter (CPE to network, male DB15 to RJ48, NT7R93AA)
1 adapter (CPE to network, female DB15 to RJ48, NT7R93BA)
1 adapter (CPE to CPE, female DB15 to RJ48, NT7R93CA)
1 label (2 in. X 1.473 in., white, self-laminating)
Nortel Communication Server 1000
Mini-Carrier Remote Fundamentals
NN43001-557 04.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
System installation 53