Table of Contents
Advertisement
A.3
Installation and maintenance schedule
Introduction
Depending on the area of application, perform the general cleaning work and maintenance
work every 6 months. Shorten this interval according in the event of difficult usage
conditions.
Follow the regionally valid regulations on servicing and maintaining this type of electrical
charging equipment.
Cleaning
Clean dirt, dust and residues from the Wallbox and the operating area. Wipe the surfaces with
a damp cloth. For stubborn stains, use a cleaning agent containing alcohol. Do not clean the
device with a pressure washer. Do not use aggressive cleaning agents.
Check
Check the Wallbox for the following:
• Cuts, damage and soiling
• Defects and rust
• Clearly visible signs of faded colors
• Residue or damage on the cables, cable holders and plugs
• Signs of rust at the plug pins
• Accumulation of snow around the Wallbox
Contact the supplier if you notice any anomalies.
Avoid accumulation of snow around the Wallbox. Clear the area accordingly. In heavy
snowfall, clear the area daily.
VersiCharge AC Wallbox IEC
Operating Instructions, 12/2021, A5E50366109-AA
A.3 Installation and maintenance schedule
Appendix
69
Advertisement
Table of Contents
