Siemens VersiCharge AC Wallbox IEC Operating Instructions Manual page 47

Commissioning
5.4 Managing and using RFID
Using RFID
With RFID cards, you authenticate yourself to start or end a charging process. The procedure
is described in section Charging (Page 52).
The supplied RFID User cards are not released. The next section describes the management of
the RFID User cards.
Alternatively, authentication via Modbus controller or OCPP server is possible. Authentication
can also be disabled in this way.
Figure 5-1
Supported RFID cards
For authentication, the Wallbox has an integrated RFID reader that is activated ex works. The
following table lists the supported chip types.
Table 5- 1
Card series
MIFARE Classic
MIFARE Plus
MIFARE DESFire
MIFARE Ultralight
46
RFID card types
Supported chip types
Memory
1 K, 4 K
1 K, 2 K, 4 K
2 K, 4 K, 8 K
40, 48, 128, 144
Security
Crypto1
AES, Crypto1
AES, 3DES
None, 3DES
Operating Instructions, 12/2021, A5E50366109-AA
Supported protocols
ISO14443A Part 1–3
ISO14443A Part 1–4
ISO14443A Part 1–4
ISO14443A Part 1–3
VersiCharge AC Wallbox IEC